===== 3D Printed Charging Dock =====
{{ :charging_dock_video.mp4?350 |}}
{{ :charging_dock.png?400 |}}
=== Key Features ===
  - **Convenient Storage Design**: Optimized layout for easy organization and centralized management of electronic hydrometers.  
  - **Embedded Wireless Charger**: Place the hydrometer in the main compartment to activate charging mode.  
  - **Sleep Compartment Design**: Side compartment for idle hydrometers, automatically triggering sleep mode to save power.  

=== Download & Print ===
1. **File Download Link**:  
   - 3D Model: [[https://ckbrew-1309636478.cos.ap-shanghai.myqcloud.com/%E7%94%B5%E5%AD%90%E6%AF%94%E9%87%8D%E8%AE%A1%E5%85%85%E7%94%B5%E5%BA%A70313.stl|Click to Download STL File]]  

2. **Recommended Printing Parameters**:  
   - Material: PETG (heat-resistant, corrosion-resistant)  
   - Layer Height: 0.2mm  
   - Infill Density: 15%  
   - Printing pauses at layer 195 for embedding 15*4mm magnets.  
   <code>Tip: Optional to remove the pause at layer 195, but magnets will not be embedded.</code>  

=== Usage Instructions ===
1. **Assembly Steps**:  
   - Embed the wireless charging module into the reserved slot in the dock.  
   - Connect the Type-C power cable to a 20W charger.  
2. **Charging Operation**:  
   - Place the hydrometer in the main compartment; red light indicates charging, green light indicates fully charged.  
   - Idle devices placed in the side compartment will automatically enter sleep mode within 60 minutes.  

=== Notes ===
  - **Charger Compatibility**: Supports 20W Type-C wireless chargers (input voltage 5V/9V).  
  - **Printing Material**: Avoid using PLA as it may deform in high-temperature environments.  
  - **Device Compatibility**: Only compatible with Cuckoo electronic hydrometers; modifications required for other brands.