Differences

This shows you the differences between two versions of the page.

--- configuration [2025/03/11 14:08] – admin
+++ configuration [2025/12/21 13:03] (current) – admin
@@ Line 1: / Line 1: @@
-===== Setup Steps =====
+===== Initial Device Setup =====
+[2026 Cuckoo Ben BLE2]
-=== Step 1: Device Initial Setup ===
+----
+{{ :配置英文_1_.mp4 |}}
+=== Step 1: Activation & Connection ===
 . **Activate the Device**
-   - Place the device on a flat surface and use a magnet to trigger the reed switch **3 times**, with each trigger within **3 seconds** (the green light will stay on upon successful activation).
+   - Place the device on a flat surface and quickly bring a magnet close to the reed switch **3 times** (each trigger within ≤3 seconds; the green light will stay on upon success).
-. **Connect to the Device Hotspot**
+. **Connect to Device Hotspot**
-   - Use your phone or computer to connect to the Wi-Fi hotspot created by the device:
+   - Name: `**CuckooTilt**`
-     - Hotspot Name: `**CuckooTilt**`
+   <code>Note: The device is only used for configuration at this stage and has no internet connection.</code>
-     - Password: `**password**`
-. **Access the Configuration Page**
-   - Enter `**192.168.4.1**` in your browser to access the ****Configuration**** page.
-   - Select the **WiFi network** you want to connect to and enter the password (you can also add a backup WiFi network and password).
-. **Copy the Device ID**
+=== Step 2: Configure WiFi ===
-   - Click **“****Click To Copy****”** to copy the device’s unique ID.
+. **Access Configuration Page**
+   - Enter `**192.168.4.1**` in your browser.
+   - Select the WiFi network and enter the password .
-. **Save Settings**
+. **Copy Device ID**
-   - Click **“Save”** to save the configuration. The device will restart automatically and connect to the WiFi.
+   - Click **Click To Copy** to copy the unique device ID.
+   <code>Warning: This ID is the device binding credential; do not share it.</code>
+. **Save Configuration**
+   - Click **Save**, and the device will restart and connect to WiFi.
 ----
-=== Step 2: Bind the Device to Your Account ===
+===== Bind Device to Account =====
-. **Register an Account**
-   - Visit `**ckbrew.com**` and register a new account.
-. **Log In and Add the Device**
+=== Step 1: Register & Log In ===
-   - Log in to your **Cuckoo Account** and select **“Add New Device”** on the page.
+. **Register an Account**
-   - Enter the **Device ID** copied in Step 1 and select your device color.
+   - Visit [[https://ckbrew.com|ckbrew.com]] to complete registration.
+. **Add Device**
+   - After logging in, select **"Add New Device"**.
+   - Enter the copied device ID and choose a color label.
+   <code>Tip: The color is only for interface identification and does not affect functionality.</code>
 ----
-=== Notes ===
+===== Notes =====
-- Ensure the device is within a reasonable distance from the router for stable WiFi signal.
+  - **Signal Stability**: The recommended distance between the device and router is ≤5 meters.
-- If the configuration fails, repeat Step 1 to reactivate the device.
+  - **Fault Recovery**: If configuration fails, repeat **Step 1** to reactivate.
-- The backup WiFi ensures continuous data upload if the primary WiFi is unavailable.
+  - **Backup Network**: If the primary WiFi disconnects, the backup WiFi will automatically activate after 20 seconds.
+  - **First Charge**: Use a 20W Type-C wireless charger for 5-8 hours.