User Tools

Site Tools


configuration

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
configuration [2025/04/16 11:19] adminconfiguration [2025/12/21 13:03] (current) admin
Line 1: Line 1:
 ===== Initial Device Setup ===== ===== Initial Device Setup =====
 +[2026 Cuckoo Ben BLE2]
  
 +
 +----
 +{{ :配置英文_1_.mp4 |}}
 === Step 1: Activation & Connection === === Step 1: Activation & Connection ===
-{{ :4月12日-英文.mp4 |}} 
 1. **Activate the Device**   1. **Activate the Device**  
    - Place the device on a flat surface and quickly bring a magnet close to the reed switch **3 times** (each trigger within ≤3 seconds; the green light will stay on upon success).      - Place the device on a flat surface and quickly bring a magnet close to the reed switch **3 times** (each trigger within ≤3 seconds; the green light will stay on upon success).  
Line 8: Line 11:
 2. **Connect to Device Hotspot**   2. **Connect to Device Hotspot**  
    - Name: `**CuckooTilt**`      - Name: `**CuckooTilt**`  
-   - Password: `**password**`   
    <code>Note: The device is only used for configuration at this stage and has no internet connection.</code>      <code>Note: The device is only used for configuration at this stage and has no internet connection.</code>  
  
Line 14: Line 16:
 1. **Access Configuration Page**   1. **Access Configuration Page**  
    - Enter `**192.168.4.1**` in your browser.      - Enter `**192.168.4.1**` in your browser.  
-   - Select the primary WiFi network and enter the password (you can also add a backup WiFi1).  +   - Select the WiFi network and enter the password .  
  
 2. **Copy Device ID**   2. **Copy Device ID**  
configuration.1744802395.txt.gz · Last modified: 2025/04/16 11:19 by admin

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki