Ckbrew

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Initial Device Setup =====
[2026 Cuckoo Ben BLE2]


----
{{ :配置英文_1_.mp4 |}}
=== Step 1: Activation & Connection ===
1. **Activate the Device**  
   - Place the device on a flat surface and quickly bring a magnet close to the reed switch **3 times** (each trigger within ≤3 seconds; the green light will stay on upon success).  

2. **Connect to Device Hotspot**  
   - Name: `**CuckooTilt**`  
   <code>Note: The device is only used for configuration at this stage and has no internet connection.</code>  

=== Step 2: Configure WiFi ===
1. **Access Configuration Page**  
   - Enter `**192.168.4.1**` in your browser.  
   - Select the WiFi network and enter the password .  

2. **Copy Device ID**  
   - Click **Click To Copy** to copy the unique device ID.  
   <code>Warning: This ID is the device binding credential; do not share it.</code>  

3. **Save Configuration**  
   - Click **Save**, and the device will restart and connect to WiFi.  

----

===== Bind Device to Account =====

=== Step 1: Register & Log In ===
1. **Register an Account**  
   - Visit [[https://ckbrew.com|ckbrew.com]] to complete registration.  

2. **Add Device**  
   - After logging in, select **"Add New Device"**.  
   - Enter the copied device ID and choose a color label.  
   <code>Tip: The color is only for interface identification and does not affect functionality.</code>  

----

===== Notes =====
  - **Signal Stability**: The recommended distance between the device and router is ≤5 meters.  
  - **Fault Recovery**: If configuration fails, repeat **Step 1** to reactivate.  
  - **Backup Network**: If the primary WiFi disconnects, the backup WiFi will automatically activate after 20 seconds.  
  - **First Charge**: Use a 20W Type-C wireless charger for 5-8 hours.